PCBs have arrived!

-

Totally board

A flurry of excitement this morning... The PCBs arrived from OSH Park!  I have to say they look gorgeous! I am in no way biased.


As a quick sanity check of the custom USB part, I dropped in a USB socket and it fitted like a dream.  I can't wait to break out the soldering iron! Fingers crossed there aren't any absolute clangers in the board design!

Comments

Post a Comment

Popular posts from this blog

Arduino and Raspberry Pi serial communciation

-
Image
Want to hook up your Arduino to your Raspberry Pi and send data between the two?  Read on! So you have your Arduino robot, or weather station and you want to send data back and forth with a Raspberry Pi?  The hardware hookup is really easy, but we have to configure a few things on the Pi. Hardware connections We'll use the serial UART pins on the Raspberry Pi Zero GPIO for this example, and transfer data from an Arduino to a Raspberry Pi zero, though all Raspberry Pis and Arduinos are capable of this feat.  The UART is a common serial communication protocol comprised of two pins labelled, RX (receive data pin) and "TX" (transmit data pin).  Wiring is easy - hook up the desired RX pin on the Arduino to the Raspberry Pi TX pin, and the Arduino TX to the Raspberry Pi RX pin.  As always, make sure you connect the ground line  between the Arduino and the Raspberry Pi.  If the particular Arduino model you are using is powered by 5V (find out by measurin...
Read more

8-Bit Computer: WS2812B LED module

-
Image
Every 8-bit computer needs some kind of output display, whether this is a LCD display, or a 7-segment display, it needs some way of displaying data to the outside world.  Wouldn't it be cool to have a pretty RGB LED display as a way of not only showing the output of computation, but to act as a screen for showing animations, even playing simple games?  At the very least it would be cool to have a kind of "RAM visualizer" to show the contents of RAM for debugging purposes. With that in mind, I recently came across a post on the timing for WS2812 LEDs, part 1 and part 2 , in which the blog post author Tim sets out the limits of the WS2812 LED protocol and shows they are rather flexible and not as stringent as the official datasheet suggests (i.e. see here for WS2812b datasheet or here ). Further he suggests a way of controlling LED strips with a simple timing cycle, encoding either a 0 or a 1 bit, like so: Tim then goes on to write some assembly language to control WS2812...
Read more